Lead-Through Breadboard Coupling Pin (for Back Surface Coupling)

Tweet about this on Twitter0Share on Facebook0Share on Google+0

Here we’ll explain how to make pins to couple breadboards. By using these pins, you can make a multi-layer breadboard like “Ikura-don (salmon roeon rice) board.

Exif_JPEG_PICTURE

The completed item is shown on the left and the material is on the right. The material is available from Akizuki Denshi Tsusho Co., Ltd. or other shops.

Exif_JPEG_PICTURE

Break off as many pins as you would need.

Exif_JPEG_PICTURE

Break off one of the black plastic parts on the separated pin by using nippers.

Exif_JPEG_PICTURE

Once one of them is broken off with nippers, the other is loosened so that you can remove it just by pulling it with fingers. If you find it difficult to take it off, break off both parts by using nippers.

Exif_JPEG_PICTURE

Put the black plastic part to one side by using pliers.

Exif_JPEG_PICTURE

It is now finished.

Exif_JPEG_PICTURE

Exif_JPEG_PICTURE

Insert the pins just like this. The length is perfect.

Post Comment