Under development

現在開発中の情報です

  • New project launched on IndieGoGo!

    New project launched on IndieGoGo!

    We have launched a campaign on IndieGoGo for Pin Header Recording Paper, in an attempt to make the product more elaborate and sophisticated! http://igg.me/p/896825/twtr/8378971 We actually have been selling it. However, the current production process with laser cutting isn’t so efficient. This IndieGoGo campaign is a fundraiser to switch the process to mass production with die cutting. Backers will be given a coupon or coupons that can be used on our eStore. With this coupon, items are available for lower prices! And the coupon is valid for all the items on the store. Please come support us with your love!

  • New project launched on Kickstarter!

    New project launched on Kickstarter!

    Our new project, CakeBoard, has finally been unveiled! http://kck.st/1nNVqgU This is a bread board of new generation. It took a big and evolutionary leap from the conventional one. When this project becomes successful and prosperous, our Bread Board Maniac team will become able to bring more awesome and cooler products to you! We definitely appreciate your support!

  • (日本語) 【祝、達成!!】Kickstarterで公開中です!

    (日本語) 【祝、達成!!】Kickstarterで公開中です!

    Sorry, this entry is only available in 日本語.

  • wire stripping Gauge

    wire stripping Gauge

    The design of the commercial version is determined! Finished model and the image of the product The one in the image is a prototype and has no scale marks on it. The commercial version is the one that has been developed with various additional features, such as: Additional feature 1: Feature to bend an IC By sliding in an IC along the ditch, opened pins are put back to fit in a breadboard! You may need a bit of skill due to its structure. Avoid pushing it in forcefully. Additional feature 2: Hole to easily bend a narrow width It was difficult to bend a thin lead wire to connect…

  • wooden breadboard

    wooden breadboard

    The breadboard for building circuits looks so lovely just by being made of wood! It will increase the charm as you use it, fit comfortably in your hands, and you will definitely feel attached to it. Wooden breadboards are handmade by craftsmen one by one. It is carefully formed from one piece of wood, polished and branded. No chemical coating material such as polyurethane is used, either. It is thoroughly polished with natural oil, finished in natural gloss. It will further increase its gloss as you use it, and its presence will not be comparable to any other breadboards you have ever had! A Japanese traditional gift box of paulownia…

  • (日本語) Thin Bread Board

    (日本語) Thin Bread Board

    Thin Bread Board is a thin double-sided breadboard. It was exhibited in MFT2013, but is still under development. It’s coming soon!

  • Gummi Board

    Gummi Board

    It is a bendable breadboard. It was exhibited in MFT2013, but it is still under development. It’s coming soon!

  • Wire Stripping Gauge “Setsudan”

    Wire Stripping Gauge “Setsudan”

    It is a tool to help you cutting jumping wires to insert into a breadboard to a desired length and form. Here is the video for how to use it. Attach it to your wire stripper. The 2.54mm pitch scale will stick out next to the tool. Just cut the wire using it as a guide, and you will get nice, uniform U-shaped jumping wires.

  • Cover for Breadboard

    Cover for Breadboard

    If you leave the lead wire of a component long or use jumping wires to build circuits temporarily on the breadboard, you accidentally touch it and cause short circuit or components to come off. We believe that some of you have experienced such trouble. To prevent such accident, we made a cover for breadboard. We want to prepare many products to be sold folded. Its dimensions are perfect for common breadboards. A breadboard fits in well and does not wobble. The top is a lid, so you can open it and modify the circuit again. Its dimensions are perfect for common breadboards. A breadboard fits in well and does not…

  • Hard-to-Come-off Jumper Wire (Prototype)

    Hard-to-Come-off Jumper Wire (Prototype)

    When using a breadboard for various purposes, one of the problems is that components may come off when you handle it roughly. One of typical components that often come off is a jumper wire (also called a jumper code or jump wire). Have you ever been disappointed that a jumper wire has accidentally come off from the breadboard while you build the circuit by trial and error and you could never find out where it has been inserted? We just thought that a hard to come off jumper wire may save you from such a sad accident, so we made one. It’s so hard to come off that a 315g…

  • Lead-Through Breadboard Coupling Pin (for Front Surface Coupling)

    Lead-Through Breadboard Coupling Pin (for Front Surface Coupling)

    Here we’ll explain how to make pins to couple breadboards. By using these pins or coupling pins for back surface coupling, you can make a multi-layer breadboard like “Ikura-don(salmon roe on rice) board”. The material is shown on the right and the completed item is on the left. The material is available from Akizuki Denshi Tsusho Co., Ltd. or other shops. First, break off as many pins as you need. Next, slide the black plastic part by pinching it with pliers. It is now completed By using some of these pins, as shown in the center of the image below, you can couple two breadboards facing each other.

  • Lead-Through Breadboard Coupling Pin (for Back Surface Coupling)

    Lead-Through Breadboard Coupling Pin (for Back Surface Coupling)

    Here we’ll explain how to make pins to couple breadboards. By using these pins, you can make a multi-layer breadboard like “Ikura-don (salmon roeon rice) board. The completed item is shown on the left and the material is on the right. The material is available from Akizuki Denshi Tsusho Co., Ltd. or other shops. Break off as many pins as you would need. Break off one of the black plastic parts on the separated pin by using nippers. Once one of them is broken off with nippers, the other is loosened so that you can remove it just by pulling it with fingers. If you find it difficult to take…

  • Lead-through Breadboard (Prototype for Standard Breadboard)

    Lead-through Breadboard (Prototype for Standard Breadboard)

    We introduced the Prototype for transparent lead-through breadboards the other day. The transparent breadboard is rather expensive, so we made the prototype of standard ivory-colored breadboard, focusing on the lead-through feature. You would see no difference from an ordinary breadboard on the surface. On the back, it has a resin board with holes instead of double stick tape. These are the lead-through holes. Other features are same with an ordinary non-lead-through breadboard. Now, we are going to determine how much work time is reduced when the lead-through breadboard is used.

  • Lead-through Breadboard (Prototype for Transparent Breadboard)

    Lead-through Breadboard (Prototype for Transparent Breadboard)

    To build a circuit neatly on the breadboard, you often cut long lead wires of electronic components to the proper length. A resistor, LED and capacitor have long lead wires, for example. The time consumed to cut lead wires is not negligible, is it? To save that time, we created the lead-through breadboard. You would see no difference from an ordinary breadboard on the surface. On the back, it has a plastic board instead of double stick tape. There are holes on the back. The holes are penetrated from the surface. You know how to use it, don’t you? Insert a component and cut the extra lead wire protruding on…

  • Breadboard for High Frequency Circuits (Prototype)

    Breadboard for High Frequency Circuits (Prototype)

    Breadboards are particularly prone to capacitive coupling between the contacting clips, and thus they are not suitable for trial production of high frequency circuits. Here, we’ve made the breadboard for high frequency circuits. You would see no difference from an ordinary breadboard on the surface. The one looking like a marking pin on the right is an accessory. We’ll explain how to use it later. On the back, the center unit with a row of five holes is transparent. This transparent unit can be detached and attached by hand. To remove the transparent cover, place a finger in the notch at the edge and pull it out. The transparent cover…

  • Tag on Breadboard

    Tag on Breadboard

    It is sometimes difficult to tell which part on the breadboard corresponds to where on the circuit. We thought it might be convenient if we can put tags on the circuit, so we created some for breadboards. The tags look like marking pins. A set of 5 colors x 5 pins= 25 pins is in a case. They can be stuck in the breadboard. You can write on the circle tab using a pencil or pen. You can write as shown above. If you write using a pencil, you can erase it later with an eraser. Some breadboards have nothing printed, and sometimes it is hard to tell at a…